Under the arch Ed takes us the through the world of discs and pads. He shows us how diagnose problems and also how to remove and replace brake discs and pads. Class includes a close look at the brake caliper: what to check and when to replace.
You Might Also Enjoy
-
1:37MGB Service Guide – Introduction
To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.
Watch Now >> -
24:27How to Rebuild an Overhead Valve Head and Fit With New Gasket
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Watch Now >> -
19:30MIG Welding Masterclass: Welding a Patch Repair
Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.
Watch Now >> -
25:27Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >>