• 8:13

    The Skill Shack with Practical Classics team plus colleagues from Land Rover Owner International magazine, visits the Britpart workshop to demonstrate how to replace the fuel injector loom on Land Rover TD5 engines. In this video, Martin from Land Rover Owner International magazine demonstrates how to remove the damaged electric fuel injectors, showing how to…

    Watch Now >>
  • 5:50

    The Skill Shack with Practical Classics team plus colleagues from Land Rover Owner International magazine, join Britpart in their workshop to demonstrate how to replace a faulty fuel pressure regulator in Land Rover TD5 engines. In this video, Martin from Land Rover Owner International magazine explains how to remove a faulty fuel pressure regulator, whilst…

    Watch Now >>
  • 7:37

    The Skill Shack with Practical Classics team plus colleagues from Land Rover Owner International magazine, demonstrate how to replace automatic gearbox oil, with guidance and expertise from Britpart. In this video, Martin from Land Rover Owner International magazine shows you how to perform a gearbox flush on a Land Rover Discovery 4 using the Wynns…

    Watch Now >>
  • 6:47

    The Skill Shack with Practical Classics team plus colleagues from Land Rover Owner International magazine, join Britpart in their workshop to explain why it’s best to fit a replacement carburettor rather than rebuild an old one in a Land Rover 2.25 petrol engine. The team will demonstrate how to tune the new carburettor, getting the…

    Watch Now >>
  • 12:51

    In this practical demonstration video from SkillShack with Practical Classics, Ed Hughes takes the theory behind the different gasket materials and types and put it into practice by demonstrating how to replace an MGB cylinder head gasket and inlet manifold seal. He discusses the best and safest methods of cleaning the surface prior to installation.…

    Watch Now >>
  • 3:53

    There are many other types of seals found in a classic car aside from gaskets and these seals need to be installed correctly. High-pressure seals in fuel injection systems, banjo fittings on fuel lines and brake calipers, copper washers and paper gaskets are all used as methods of sealing and some of these joints are…

    Watch Now >>
  • 7:14

    In this SkillShack how-to video, Ed Hughes explores and explains the various types of gaskets that can be used to maximum effectiveness for leak-free jointing on flat surfaces within a classic car engine. Understanding the types of materials and design features of the various gaskets you are likely to need is key to correct installation…

    Watch Now >>
  • 18:53

    In this ‘how-to’ video guide from Skill Shack, Ed Hughes talks you through a procedure which can be used to tune and synchronise twin carburettors without specialist equipment. As a result of watching this video tutorial, you’ll have the necessary skills to help you get your classic car’s engine running smoothly with increased power and…

    Watch Now >>
  • 9:50

    There are many advantages of converting an older classic car from a negative earth electrical system to a positive earth system. Not least of which because it enables you to use modern radios, accessories and upgrade to an alternator. In this ‘how to’ video tutorial, Ed Hughes will show you how to re-polarise the dynamo…

    Watch Now >>