In this class Ed assesses the cylinder head, and in this video he includes tips on bore assessment and a step by step guide to valve stem oil seal replacement.
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.Watch Now >>
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.Watch Now >>
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.Watch Now >>
More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.Watch Now >>