To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.
Any capable restorer of classic cars ought to know how to decoke an engine. Over time the engine on a classic car becomes backed up with carbon, which causes the efficiency of said engine to drop. When enough carbon builds up, it might be time to decoke the engine–but how do you know whether it’s the right time?
Throughout this course, Danny and Ed will teach you some of the basic tips any car restorer needs to correctly maintain cylinder heads and gaskets, focusing on how to decoke an engine once the head has been removed.Watch Now >>
There are multiple reasons why you’d need to remove the cylinder head from the engine of your classic car. Ed Hughes teaches you what to look for when deciding whether to remove the head, and then demonstrates the proper technique for doing so.Watch Now >>
Now that you know how to join two wires and you have a basic understanding of circuit diagrams, it’s time to try your hand at a simple project. Learn how to use essential tools and your new knowledge of electrical wiring to install auxiliary lights to the front of your classic car.Watch Now >>
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.Watch Now >>