With the front end out of the way, now we’ll need to take a look at all components on the underside of an MGB from the gearbox to the rear wheels. Danny and Matt work their way backwards, inspecting every part they can see and even those they can’t.
You Might Also Enjoy
-
18:01How and When to Remove a Cylinder Head – Top Tips
There are multiple reasons why you’d need to remove the cylinder head from the engine of your classic car. Ed Hughes teaches you what to look for when deciding whether to remove the head, and then demonstrates the proper technique for doing so.
Watch Now >> -
19:05Carburettor Checks – the Step by Step Guide
In the final class of our video series on basic engine maintenance, Ed walks you step by step through a servicing of the components on an engine’s carburettor. You’ll learn the basics of the carburettor and discover how to make sure it is in proper working condition.
Watch Now >> -
6:47How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >> -
16:51Basic Checks and Timing Guide – BMC B Series Engine
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.
Watch Now >>