We are now aware of a couple different types of welding. The next and final step is to make sure we fully understand their uses and decide which type of weld we should apply in a certain situation. To help you make that decision, Ben introduces a variety of scenarios and discusses the tools and joints he recommends using for each.
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.Watch Now >>
Any capable restorer of classic cars ought to know how to decoke an engine. Over time the engine on a classic car becomes backed up with carbon, which causes the efficiency of said engine to drop. When enough carbon builds up, it might be time to decoke the engine–but how do you know whether it’s the right time?
Throughout this course, Danny and Ed will teach you some of the basic tips any car restorer needs to correctly maintain cylinder heads and gaskets, focusing on how to decoke an engine once the head has been removed.Watch Now >>
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.Watch Now >>
To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.Watch Now >>