Thank you for signing up for our newsletter.
Please enjoy these instructional videos free of charge!
Stop your classic car overheating – the 5 common faults
If you’ve ever sat in traffic and watched the temperature needle go into the red you need to watch this video. Ed Hughes describes the simple checks you need to do to make sure your classic doesn’t overheat.
Squealing Belts! How to Check, Test and Replace Them
In this video lesson, Ed Hughes provides an easy guide to making sure all your drive belts are in tip-top condition. Ed talks through effective ways to isolate squealing belt problems, and shows the best way to remove the fan belt from your classic car and check it for wear.
How to Test and Refill Anti-freeze
Ed Hughes recommends the most suitable anti-freeze to use for your classic car and the correct type of water to use with your anti-freeze. He also gives some top tips on how to make sure your classic car doesn’t overheat by ensuring you use the correct quantity. Find out how and why you should use an antifreeze tester in this video.
How to Remove, Check and Replace a Thermostat
Ed reveals all you need to know about removing, checking and replacing a thermostat. He explains how the thermostat works, what can go wrong and a basic test you can perform to check if the thermostat is working properly.
How to flush and cleanse your cooling system
Simple step-by-step advice on how to drain, flush and cleanse your cooling system, an especially important job for a classic car that’s been parked up for a number of years.
How to assess and replace a water pump
In this video Ed demonstrates how to check a water pump for the tell-tale signs of wear and corrosion.