Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.
You Might Also Enjoy...
-
13:41Cold Engine Checks (Part 2) – B Series Engine – Step by Step
In the second half of our cold engine check, Danny and Clive disengage the spark plug leads to take a closer look at the quality and cleanliness of the spark plugs. They also inspect the brake and clutch fluid reservoirs, oil and coolant. Before cracking on to the warm engine inspection, be sure to walk through each of the components Danny and Clive cover, looking for damage and other abnormalities.
Watch Now >> -
6:56Classic Electrics – Principles Explained and Applied
In the first step of our five-part course, Ed Hughes teaches you the basics of electricity and how these basics apply to the wiring on your classic car. You’ll learn some of the key terms that will come in handy later in this series, including the essential technology that connects your car’s electrical components to the car’s battery.
Watch Now >> -
15:59How to Check Your Engine for Wear and Tear
In the next step of basic engine maintenance, Ed explains how you can learn a great deal about a car engine’s wear and general health by inspecting a few key components and completing a test or two.
Watch Now >> -
24:27How to Rebuild an Overhead Valve Head and Fit With New Gasket
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Watch Now >>