Unlike MIG welding, its cousin TIG welding does not require a wire to operate–instead it uses tungsten and gas to create the weld. In this class, Ben teaches you the basics of TIG welding, discussing the theory behind its methods and demonstrating the essential techniques you’ll need to complete a TIG weld on your classic car.
-
9:17
Circuit Diagrams Explained – Faultfinding Guide
More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.
Watch Now >> -
25:27
Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >> -
15:11
How to Weld in a New Wheel Arch Panel – Step by Step
Discover the different forms of welding and assess which is most appropriate for your car’s new wheel arch. Michael Coman discusses the pros and cons of each weld type, and teaches you how to install and weld a factory wheel arch in place of an old rusted component.
Watch Now >> -
12:44
Timing the Ignition and Replacing and Gapping Points
In this class, Ed teaches you four new techniques pertaining to ignition maintenance for an engine’s distributor on a classic car, including:
Setting and changing contact breakers
Watch Now >>
Making sure a condenser is working properly
Timing the ignition