How to diagnose smoking problems in your classic car. Expert car restorer Ed Hughes takes you through the tests you must do to find out what precisely is wrong. This video contains essential diagnostic tips to find out what needs to be done.
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.Watch Now >>
In the previous class, Ed showed you how to clean the valves and prepare them for reinsertion into the head. Now, you’ll learn how to lap in the valves using grinding paste and then decoke the engine in order to increase its efficiency and ensure top-notch engine performance for another several thousand miles. Ed introduces the tools you need to complete this process and then shows you how to use them.Watch Now >>
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.Watch Now >>
Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.Watch Now >>