Now that you know how to join two wires and you have a basic understanding of circuit diagrams, it’s time to try your hand at a simple project. Learn how to use essential tools and your new knowledge of electrical wiring to install auxiliary lights to the front of your classic car.
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.Watch Now >>
In the final class of our course on classic car electrics, Ed teaches you about the ignition system on your car. He discusses the two halves of the ignition system, explains how the system is wired to the rest of a car, and then shows you how to trace faults.Watch Now >>
To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.Watch Now >>
More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.Watch Now >>