Valves are highly important for the optimal performance of a car’s engine. In this class, Ed teaches you how to inspect and adjust valve clearances to guarantee they are set in the proper spot for fluid, unimpeded engine motions.
-
18:01
How and When to Remove a Cylinder Head – Top Tips
There are multiple reasons why you’d need to remove the cylinder head from the engine of your classic car. Ed Hughes teaches you what to look for when deciding whether to remove the head, and then demonstrates the proper technique for doing so.
Watch Now >> -
21:21
Cold Engine Checks – B Series Engine – Step by Step
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.
Watch Now >> -
25:27
Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >> -
6:47
How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >>