Ed takes us through the process required to adjust drum brakes and the handbrake. He also demonstrates the checks required to ensure a safe set up.
You Might Also Enjoy
-
25:27Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >> -
24:27How to Rebuild an Overhead Valve Head and Fit With New Gasket
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Watch Now >> -
19:30MIG Welding Masterclass: Welding a Patch Repair
Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.
Watch Now >> -
21:21Cold Engine Checks – B Series Engine – Step by Step
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.
Watch Now >>