Now that we’ve gotten the basics down and we know what to expect with a weld, it’s time to put theory into practice by completing a real weld on our classic car. Ben Field walks you step by step through the process, demonstrating expert techniques, including working along curves and maintaining a safe welding space throughout.
-
7:46
Classic Ignition Wiring Explained and Explored
In the final class of our course on classic car electrics, Ed teaches you about the ignition system on your car. He discusses the two halves of the ignition system, explains how the system is wired to the rest of a car, and then shows you how to trace faults.
Watch Now >> -
25:27
Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >> -
16:51
Basic Checks and Timing Guide – BMC B Series Engine
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.
Watch Now >> -
6:47
How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >>