Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.Watch Now >>
More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.Watch Now >>
Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.Watch Now >>
Any capable restorer of classic cars ought to know how to decoke an engine. Over time the engine on a classic car becomes backed up with carbon, which causes the efficiency of said engine to drop. When enough carbon builds up, it might be time to decoke the engine–but how do you know whether it’s the right time?
Throughout this course, Danny and Ed will teach you some of the basic tips any car restorer needs to correctly maintain cylinder heads and gaskets, focusing on how to decoke an engine once the head has been removed.Watch Now >>