To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.
-
10:48
Classic Wiring Tools – How to Join Two Wires
Discover the basic set of tools you’ll need to complete a number of electrical jobs on your classic car. Ed Hughes introduces these necessary tools and then demonstrates the quick methods he uses to join two wires.
Watch Now >> -
19:05
Carburettor Checks – the Step by Step Guide
In the final class of our video series on basic engine maintenance, Ed walks you step by step through a servicing of the components on an engine’s carburettor. You’ll learn the basics of the carburettor and discover how to make sure it is in proper working condition.
Watch Now >> -
19:30
MIG Welding Masterclass: Welding a Patch Repair
Taking care of a rotten part on your car can be challenging, but fixing the problem before it spreads is highly important for the overall integrity of the body. Michael Coman helps you through the often difficult process of removing a corroded section from a car’s frame and welding a simple patch to fill the gap and restore the strength of your vehicle.
Watch Now >> -
6:47
How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >>