Please select from the available subscriptions above
In this class we discuss how you can use ‘corrosion free engineering’ throughout your restoration, including the use of weld through primers and seam sealers. Ian uses his many years’ experience in the rust prevention and repair industry to show us how to prevent rust throughout your restoration. Ian teaches Matt how to properly apply seam sealers to new welds on a car. This is an important step in preventing rust and should be carried out on both new welded joints and factory seams.
Discover the basic set of tools you’ll need to complete a number of electrical jobs on your classic car. Ed Hughes introduces these necessary tools and then demonstrates the quick methods he uses to join two wires.
Watch Now >>
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.
Watch Now >>
More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.
Watch Now >>
In the final class of our course on classic car electrics, Ed teaches you about the ignition system on your car. He discusses the two halves of the ignition system, explains how the system is wired to the rest of a car, and then shows you how to trace faults.
Watch Now >>