In How to Get Rid of Rust, you’ll learn how to prevent and treat rust on your car. Our expert guide, Ian Allen, will take you through the various stages to ensure a rust-free car and worry-free motoring for years to come. A small investment now could save you the cost of complete restoration further down the line.
-
6:56
Classic Electrics – Principles Explained and Applied
In the first step of our five-part course, Ed Hughes teaches you the basics of electricity and how these basics apply to the wiring on your classic car. You’ll learn some of the key terms that will come in handy later in this series, including the essential technology that connects your car’s electrical components to the car’s battery.
Watch Now >> -
24:27
How to Rebuild an Overhead Valve Head and Fit With New Gasket
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Watch Now >> -
6:47
How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >> -
21:21
Cold Engine Checks – B Series Engine – Step by Step
In our first class, Danny and Clive dig into the engine bay to inspect a number of components prior to starting the engine. Cold engine checks are recommended for taking a closer look at hoses and other smaller parts of the engine that easily show damage and wear by shining a light. Before moving on to the next class, make sure you’ve inspected each of the components seen in this video.
Watch Now >>