In the previous class, Ed showed you how to clean the valves and prepare them for reinsertion into the head. Now, you’ll learn how to lap in the valves using grinding paste and then decoke the engine in order to increase its efficiency and ensure top-notch engine performance for another several thousand miles. Ed introduces the tools you need to complete this process and then shows you how to use them.
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.Watch Now >>
Discover the different forms of welding and assess which is most appropriate for your car’s new wheel arch. Michael Coman discusses the pros and cons of each weld type, and teaches you how to install and weld a factory wheel arch in place of an old rusted component.Watch Now >>
In the first step of our five-part course, Ed Hughes teaches you the basics of electricity and how these basics apply to the wiring on your classic car. You’ll learn some of the key terms that will come in handy later in this series, including the essential technology that connects your car’s electrical components to the car’s battery.Watch Now >>
In the second half of our cold engine check, Danny and Clive disengage the spark plug leads to take a closer look at the quality and cleanliness of the spark plugs. They also inspect the brake and clutch fluid reservoirs, oil and coolant. Before cracking on to the warm engine inspection, be sure to walk through each of the components Danny and Clive cover, looking for damage and other abnormalities.Watch Now >>