Ed is out on the road to show you the simple checks and tests you can do to make sure your brakes are in good working order. He checks front and rear brakes as well as the handbrake, master cylinder and brake servo.
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.Watch Now >>
In the previous class, Ed showed you how to clean the valves and prepare them for reinsertion into the head. Now, you’ll learn how to lap in the valves using grinding paste and then decoke the engine in order to increase its efficiency and ensure top-notch engine performance for another several thousand miles. Ed introduces the tools you need to complete this process and then shows you how to use them.Watch Now >>
In the final class of our course on classic car electrics, Ed teaches you about the ignition system on your car. He discusses the two halves of the ignition system, explains how the system is wired to the rest of a car, and then shows you how to trace faults.Watch Now >>
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.Watch Now >>