Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
You Might Also Enjoy...
-
1:58How to Decoke Your Classic’s Engine – Introduction
Any capable restorer of classic cars ought to know how to decoke an engine. Over time the engine on a classic car becomes backed up with carbon, which causes the efficiency of said engine to drop. When enough carbon builds up, it might be time to decoke the engine–but how do you know whether it’s the right time?
Throughout this course, Danny and Ed will teach you some of the basic tips any car restorer needs to correctly maintain cylinder heads and gaskets, focusing on how to decoke an engine once the head has been removed.
Watch Now >> -
16:51Basic Checks and Timing Guide – BMC B Series Engine
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.
Watch Now >> -
24:27How to Rebuild an Overhead Valve Head and Fit With New Gasket
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Watch Now >> -
15:11How to Weld in a New Wheel Arch Panel – Step by Step
Discover the different forms of welding and assess which is most appropriate for your car’s new wheel arch. Michael Coman discusses the pros and cons of each weld type, and teaches you how to install and weld a factory wheel arch in place of an old rusted component.
Watch Now >>