Tyre rubber deteriorates over time, and should be replaced once it gets too old. Matt and Danny explain the dating system used on modern tyres.
For more helpful tips and techniques, be sure to check out our MGB Service Guide course.
Related Videos
-
6:47Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >> -
9:17More often than not, an electrical issue on a classic car is as simple as adjusting a fuse or correcting a faulty wire. For those times when it’s just a bit more complicated, Ed teaches you how to read a circuit diagram on your classic car to discover where the faulty component might be in your car’s system.
Watch Now >> -
13:41In the second half of our cold engine check, Danny and Clive disengage the spark plug leads to take a closer look at the quality and cleanliness of the spark plugs. They also inspect the brake and clutch fluid reservoirs, oil and coolant. Before cracking on to the warm engine inspection, be sure to walk through each of the components Danny and Clive cover, looking for damage and other abnormalities.
Watch Now >> -
7:46In the final class of our course on classic car electrics, Ed teaches you about the ignition system on your car. He discusses the two halves of the ignition system, explains how the system is wired to the rest of a car, and then shows you how to trace faults.
Watch Now >>