Many vibration issues can be traced to deformed or damaged tyres. In this video course, you will discover how to inspect your tyres for signs of wear, bulging and other faults in order to diagnose vibration. Also we show you how to carry out static wheel balancing at home to fix wheel wobble and vibration at certain speeds. This video course also explains how to spot tyres that have been distorted after being stored for too long, as well as top tips on tyre care when in storage.
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.Watch Now >>
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.Watch Now >>
In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.Watch Now >>
Now that you know how to join two wires and you have a basic understanding of circuit diagrams, it’s time to try your hand at a simple project. Learn how to use essential tools and your new knowledge of electrical wiring to install auxiliary lights to the front of your classic car.Watch Now >>