Ed explains the function of the drum brake set up and demonstrates how to replace shoes and drums. In doing so he also examines the wheel cylinder with an explanation of common faults and how to sort them.
-
6:47
How to Get the Best Finish After Welding
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.
Watch Now >> -
1:37
MGB Service Guide – Introduction
To give you a clear understanding of what you should do when you go through the process of an MGB restoration, our Skill Shack servicemen will teach you a new technique in each of five classes. Danny Hopkins, Matt Tomkins and Clive Jefferson will demonstrate some of the necessary skills you’ll need when you pop the bonnet on your own MGB.
Watch Now >> -
25:27
Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >> -
10:33
The Easy Guide to Setting Valve Clearances
Valves are highly important for the optimal performance of a car’s engine. In this class, Ed teaches you how to inspect and adjust valve clearances to guarantee they are set in the proper spot for fluid, unimpeded engine motions.
Watch Now >>