Michael Coman demonstrates how to weld the different joints you might find on your restoration project. You will learn how to perform:
- Plug welds
- Butt welds
- T-joints
- Outside corner welds
Welding in different positions – plug, butt, lap T and corner joints Download
£7.99
Michael Coman demonstrates how to weld the different joints you might find on your restoration project.
Related products
-
16:51Basic Checks and Timing Guide – BMC B Series Engine
Next in the process, we’ll turn on the MGB to have a look, a listen and a feel at how the engine is running. Danny and Clive teach you how to complete a warm engine check, which requires you to pay particular attention to the sounds, the smells and the vibrations emanating from the car. Learn to diagnose any abnormalities in timing and efficiency while the car is still in the garage.
Watch Now >> -
1:49The Basics of MIG Welding: Introduction
Learning to create a weld for your classic car can help you avoid a very pricy service charge and a long holdover in the auto shop. Instead of relying on someone else to do the job, we’re going to teach you how to MIG weld so you can complete a basic repair on your classic car in your own garage. It simply takes practice, patience and maybe an expert guide.
Watch Now >> -
22:15Basic Engine Servicing Top Tips
First things first in basic engine maintenance on a classic car are some simple tips for servicing the engine. There are a number of components on a car’s engine that require regular inspection and scheduled replacements.
Watch Now >> -
25:27Dismantle and Assess Your Classic’s Head – Step by Step Guide
Once you’ve removed the cylinder head from the engine block, it’s necessary to dismantle the head to properly assess its condition and decide the next course of action. Ed teaches you how to search for any damage on the surface, including to the valves, head and copper sealing rings and the head gaskets, and then takes the head apart to have a look at each of the components inside.
Watch Now >>