In the final step of the engine decoking process, you’ll learn to reassemble the head, replace a new gasket, and remount the cleaned and decoked components onto the engine block. Ed walks you step by step through the finishing methods needed to put the cylinder head back together and make sure everything is properly affixed and operational.
Now that we’ve checked the components in our MGB’s engine bay, it’s time to prop the car up and look under it’s belly at the front end. Danny and Matt take a look at everything on the front of the car, from the suspension to the steering column and even some of the body work, checking to see that all parts are undamaged and in working order.
Michael Coman demonstrates the proper technique for achieving a sleek, even finish on a weld. You’ll learn about necessary safety equipment and the correct protocol for using various grinding and sanding tools to carefully wear down the weld until it is flush with the surfaces of your newly joined pieces.