If I Need to Change the Coolant in a 1960s Classic, What Sort Should I Use?

coolantUse standard ethylene glycol antifreeze mixed with deionised water (or soft tap water) at a ratio of one part antifreeze to two parts water. It would do no harm to flush the system a few times with plain water to remove sediment. Fill it up, run the engine until hot then drain the water. Allow it to cool fully before refilling. Oil capacity: 9 1/2 pints (5.25 litres) of 20W/50 mineral oil. Make sure it has an API rating as a mark of quality. Also, check the levels in the gearbox, final drive, power steering and carburettor dashpots. Track down a workshop manual for further servicing data, or consult the P6B Service Guide in the July 2013 issue of Practical Classics.

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

One Response to “If I Need to Change the Coolant in a 1960s Classic, What Sort Should I Use?”

  1. mark staveley

    Would a non-aqueous coolant like 4-life be better for Classics?